Ducati PANIGALE V4 2022 Owner'S Manual Download Page 68

Page: 68 / 310

Hazard function (4 turn indicators)

The "Hazard" function turns all four turn indicators

on at the same time to signal an emergency

condition. Push the button to activate the “Hazard”

function. It can only be activated when vehicle is

turned on (Key-ON). When the "Hazard" function is

active, all four turn indicators blink at the same time

as well as warning lights on the instrument panel.

The “Hazard” function can be manually turned off

exclusively when vehicle is on (key-on), by pressing

button (3).
Once the "Hazard" function is activated, if vehicle is

turned off (key turned to "OFF"), the function stays

active for 2 hours. After 2 hours, the turn indicators

switch OFF automatically in order to save battery

charge.

Note

If user performs a Key-ON while the "Hazard"

function is still active, the function will remain ON

(temporary turn indicator control interruption is

allowed during the instrument panel initial check

routine).

Note

If there is a sudden interruption in the battery

while the function is active, the instrument panel will

disable the function when the voltage is restored.

Note

The "Hazard" function has higher priority

compared to normal operation of the single turn

indicators, this means that, as long as it is active, it

will not be possible to activate the single right or left

turn indicators.

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands