Ducati Multistrada 1200S Pikes Peak, Owner'S Manual

Page: 145 / 278

PIN CODE change function
This function changes your four number PIN CODE.
To display the function, enter the “setting” menu
page 87 and access the “PIN CODE” page.
Note
If “NEW PIN” and the dashes “- - - -” appear
when accessing this function, this means that the
function was not active as the PIN CODE was never
entered. Enter your PIN as described in the previous
paragraph “PIN CODE activation function”.
When accessing the function, “MODIFY” will appear
on the round display; press the reset button (4)
showing “MODIFY” to modify the PIN.
Note
To change the PIN, you must know the currently
stored PIN.
"OLD PIN" and four dashes "- - - -" will appear on the
round display; now enter the previously stored 4 digit
code.
Entering the “old” PIN: each time you press the
button (2) the displayed number increases from “0”
to “9” and then returns to “0”.
To confirm the number, press the reset button (4).
Repeat the procedure until entering the fourth digit.
Press the reset button (4) again to confirm. “OK” and
“EXIT” will appear on the display.
To confirm the "old" PIN that was entered, press the
reset button (4) again showing “OK”.
If the code is not correct, “OLD PIN WRONG” will
appear for 3 seconds and then the instrument panel
will return displaying “MODIFY” so you can repeat
the attempt of entering the "old" code.
142