Ducati Multistrada 1200S Pikes Peak, Owner'S Manual

Page: 88 / 278

“LOAD” function (bike setting change)
This function changes vehicle setup.
Each individual riding mode is associated with four
different setups:
-
rider only (5);
- rider with luggage (6);
- rider with passenger (7);
- rider with passenger and luggage (8).
To change the vehicle setup, press the reset button
(4) for 3 seconds consecutively and the "LOAD" menu
will appear on the round display (B). The desired
setup can be selected by pressing the same reset
button multiple times (4). To confirm the setup, press
the same reset button again for 3 seconds (4). At the
end of the 3 seconds, the change occurs immediately
and the instrument panel exits the display mode
automatically. Example: if a setup change is made
from "rider only" (5) to "rider with luggage” (6), the
change may vary depending on the set riding mode
(the “rider with luggage” setup (6) may have different
adjustments depending on the riding mode that is
set: SPORT, TOURING, URBAN or ENDURO). If the
“LOAD” menu is activated and the rest button is not
pressed (4) for 10 consecutive seconds, the
instrument panel will automatically exit the display
mode without making any change.
Attention
The setup change can lead to a different
motorcycle riding style; it is recommended to be
careful if changing the setup while riding (it is
recommended to change the setup at a low speed).
85