Ducati Multistrada 1200S Pikes Peak, Owner'S Manual

Page: 96 / 278

DTC (Ducati Traction Control) setting
function
This function customizes the intervention level of the
DTC (Ducati Traction Control).
To display the function, enter the “setting” menu
page 87 and access the “SET UP” page.
Use buttons (1) and (2) to select the riding mode to
be changed and press the reset button (4) to access
the "DTC" function.
When accessing the function, the set DTC level
"LEVEL" will appear at the top of the round display.
The intervention levels range from “1” to “8”; the
higher the number, the greater the intervention of the
Traction Control system.
To change the DTC intervention level, use buttons (1)
and (2) to select the "LEVEL" indication and press the
reset button (4). The number to be set is shown on
the display; buttons (1) and (2) can increase or
decrease the number; press the reset button (4) to
confirm the new level.
If you set it to "OFF" the DTC is disabled.
At this point, store the new setting by pressing the
reset button (4) with “MEMORY” displayed.
The upper indication "LEVEL" will be updated to
confirm that the new setting was “received” and
stored.
To exit the function, select “EXIT” and press the
reset button (4). The DTC intervention increases,
passing from level 1 to level 8. The DTC intervention
increases, passing from level 1 to level 8.
Attention
When you select and store DTC levels 1 or 2,
the system automatically triggers the "DTC OFF
ROAD" warning; in this case Ducati recommends you
pay utmost attention when riding and use this type of
DTC setting OFF road only.
93