![background image](http://html1.mh-extra.com/html/ducati/hypermotard-950sp/hypermotard-950sp_owners-manual_2537655238.webp)
Check clutch and brake fluid level
The levels should not fall below the MIN marks on
the respective reservoirs.
If level drops below the limit, air might get into the
circuit and affect the operation of the system
involved.
Brake and clutch fluid must be topped up and
changed at the intervals specified in the scheduled
maintenance table contained in the Warranty
Booklet; please contact a Ducati Dealer or
Authorised Service Centre.
CLUTCH SYSTEM
If the control lever has exceeding clearance and the
transmission snatches or jams as you try to engage a
gear, it means that there is air in the circuit. Contact
your Ducati Dealer or Authorised Service Centre to
have the system inspected and air drained out.
Attention
Clutch fluid level will increase as clutch plate
friction material wears down. Do not exceed the
specified level (3 mm - 0.12 in above the minimum
level).
BRAKE SYSTEM
If you find exceeding clearance on brake lever or
pedal and brake pads are still in good condition,
contact your Ducati Dealer or authorised Service
Centre to have the system inspected and any air
drained out of the circuit.
Fig 196
237
Summary of Contents for HYPERMOTARD 950SP
