Ducati HYPERMOTARD 950SP, Owner'S Manual

Page: 167 / 295

Lap time (Lap)
To activate the Lap function, refer to chapter
"Setting menu - lap timer (Lap)" page 125.
When the Lap function is activated, the timer is
displayed on the main screen indicating 0’00.00 as
well as the lap number with first indication "Lap - -".
When button (3) is pressed for the first time, the lap
timer starts with a tenth-of-a-second resolution and
the Lap number in progress is displayed. Both data
flash for 4 seconds and then remain steady on.
Every time button (3) is pressed again, the display
shows the number and time of the just-ended lap for
6 seconds.
Then the timer and the number of the new current
lap are displayed again.
If lap timer is active but motorcycle is at standstill,
lap timer is stopped after 5 seconds and it is
displayed with the initial indication 0’00.00 and the
lap number “Lap - -”.
The next time rider pushes button (3), the lap timer is
reactivated.
Note
When LAP function is active, button (3) takes
on the dual function of high beam Flash and LAP
timer Start/Stop.
It is possible to record the lap time, for a total of 30
consecutive laps.
Laps are numbered from 01 to 30: when lap 30 is
reached, “FULL” is displayed steadily when button (3)
is pressed.
To delete the recorded laps, refer to paragraph
"Setting menu - lap timer (Lap)" page 125.
DQS
1
N
0
2
3
4
5
6
7
8
9
10
11
10:34
AM
DTC 5
U/D
ABS 1
DWC
RPM X 1000
km/h
40
°C
TOURING Gear
1
km TOT
5260
Lap 1
01’35.27
3
Fig 128
166