![background image](http://html1.mh-extra.com/html/ducati/hypermotard-950sp/hypermotard-950sp_owners-manual_2537655149.webp)
When the calibration procedure starts, the
instrument panel displays the message "Ready"
flashing, the message "Keep Speed" with speed
range and the gear to be maintained by the user to
complete the teach-in procedure. On the right the
reference Riding Mode, current speed and gear
engaged.
Important
The teach-in procedure is allowed only at a
vehicle speed between 48 Km/h (30 mph) and 52
Km/h (32 mph) in the 2rd gear.
When the rider complies with the required
conditions of vehicle speed and gear displayed, the
instrument panel starts system calibration: all
previous information will be displayed showing "In
progress" instead of "Ready".
Calibration is performed by keeping speed and gear
within the indicated range for 5 seconds.
Ready
Keep Speed
48 - 52 km/h
and Gear 2
Tire Setting
Sport
50
2
Gear
km/h
1
2
4
Fig 112
148
Summary of Contents for HYPERMOTARD 950SP
