Ducati HYPERMOTARD 950SP, Owner'S Manual

Page: 208 / 295

Adjusting the position of the
gearchange pedal and rear brake
pedal
The position of the gearchange and rear brake
pedals in relation to the footrests can be adjusted to
suit the requirements of the rider.
Adjust the pedals as follows:
Gear change pedal
Using an open-end wrench, work screw (2) and lock
the rod (3) to adjust rod (1) position. Set the
gearchange pedal to the required position.
Once the adjustment is completed, check the correct
value (A) that must be:
A= 95 mm (+3; 0 mm) / (3.74 in) (+0.12; 0 in).
1
2
3
Fig 164
A
Fig 165
207