Gear indication
The instrument panel receives information about
the gear engaged and displays the corresponding
value.
If a gear is engaged, the displayed value may range
from 1 to 6, while if in neutral N is displayed and the
Neutral warning light (2, Fig 4) turns on.
A dash “-” is displayed in these cases:
-
dash “-” and Neutral (warning light 2, Fig 4)
flashing on the instrument panel if the gear
teach-in procedure has not been performed yet;
-
dash “-” steady and Neutral
(warning light 2, Fig 4) flashing on the
instrument panel in case of gear sensor fault;
-
dash “-” flashing if the instrument panel does
not receive the gear information.
Note
If the display shows “-” steady on and the
Neutral light is off, then the gearbox could be in a
mechanically unstable position; in such a case, up/
downshift until the correct gear is indicated.
Note
When the rpm indicator becomes amber
yellow, the instrument panel is warning the rider to
shift up.
DQS
1
3
90
2
3
4
5
6
7
8
9
10
11
10:34
AM
DTC 5
U/D
ABS 1
DWC
RPM X 1000
km/h
km
TOT
5260
40
°C
TOURING
Gear
1
Fig 12
40
Summary of Contents for HYPERMOTARD 950SP
