Ducati HYPERMOTARD 950SP, Owner'S Manual

Page: 122 / 295

Entering the old Pin Code:
After accessing the Pin Code change function
(Modify Pin), the instrument panel displays “Old Pin”
with spaces allowing to enter the four digits of the
previously set Pin code: “0” and “- - -“. The two
arrows above and below the digit indicate that it is
possible to change the value using button (1) and
button (2).
Entering the code:
1) Each time you press the button (1) the displayed
number increases by one (+1) up to "9" and then
starts back from “0”;
2) Each time you press the button (2) the displayed
number decreases by one (-1) up to "0" and then
starts back from "9";
3) Press button (4) to confirm the number and
move on to the following digit.
4) Repeat the operations under steps 1) - 3) until
you confirm all the 4 digits of the Pin Code.
Old Pin 6 - - -
...
1
2 4
Fig 79
Old Pin 6 8 4 7
...
1
2 4
Fig 80
121