Ducati HYPERMOTARD 950SP, Owner'S Manual

Page: 237 / 295

Main use and
maintenance operations
Checking coolant level and topping
up, if necessary
Check coolant level in the expansion tank on the
right side of the steering tube. Steer completely to
the left and check that the level is between the MIN
and MAX marks on the side of the expansion
reservoir. Top up if the level is below the MIN mark.
Unscrew the filler plug (1) and add ENI Agip
Permanent Spezial antifreeze (do not dilute, use
pure), until reaching the MAX level. Screw plug (1)
into seat. This type of mixture ensures the best
operating conditions (the coolant starts to freeze at
-20 °C/-4 °F).
Cooling circuit capacity: 2.2 l (0.58 gal).
Attention
This operation must be performed with cold
engine. Failure to observe the above
recommendation may lead to coolant or hot vapour
leakage with possible consequent severe burns.
1
MAX
MIN
Fig 195
236