![background image](http://html1.mh-extra.com/html/ducati/hypermotard-950sp/hypermotard-950sp_owners-manual_2537655129.webp)
If there are memorised laps, when accessing this
page the instrument panel will show the following
information:
-
< Back
-
Lap 01
-
.....
-
Lap 30
-
< Back
With buttons (1) or (2) it is possible to select one
information. The displayed LAPs are only the
recorded ones. For each memorised LAP, the display
shows also:
-
the word “Time” followed by the recorded LAP
time (minutes – seconds – hundredths of
second);
-
“Speed Max” indication followed by the top
speed recorded during the lap;
-
“Rpm Max” indication followed by the engine
rpm value reached in the recorded lap.
It is possible to record maximum of 30 LAPs.
To exit the menu and go back to previous page
highlight the "< Back" indication and press button
(4).
Note
The MAX stored speed is reached during lap
(increased by 5%).
Note
If top speed over the lap exceeded 299 Km/h
(186 mph), this function shows the actual speed
reached (e.g.: 316 Km/h).
Lap 1
Lap 2
Lap 3
< Back
Time
rpm max
Speed Max
1’23’98
9600
238 km/h
...
1
2
4
Fig 90
128
Summary of Contents for HYPERMOTARD 950SP
