DSG Technology IM 2000, User Manual

Page: 49 / 102

Chapter 6 Voice Messaging
6-9
Figure 6-7
7. Edit personal mailbox notification functions:
Internal Notification Method Each mailbox can select its own method of Internal
Notification. The methods include the following:
∎
MsgLamp1 The Internal Notification will be done via the Message Lamp on
the phone set. The Message Lamp On/Off Sequences must be properly defined
for the Message Lamp Notification to function correctly.
(For Message Lamp
On/Off Sequence, see page 6-3)
∎
MsgLamp2 Some PBX has more than 1 set of Message Lamp On/Off
Sequences. This allows you to use the second Message Lamp On/Off Sequences
for the Message Lamp Notification to work.
∎
Extension IM1200 will call the extension and inform the mailbox owner of the
new messages and guide him/her to retrieve new messages. (For Ring
Notification Parameters, see page 6-4)
∎
Disabled The Internal Notification can be disabled.
Internal Notification Extension Number A real extension must be defined for the
internal notification. This extension is usually the same as the mailbox number.
Enable External Notification
External Notification can also be enabled or disabled.
Once it is disabled, the mailbox owner cannot enable it again from the extension. It
can only be re-enabled through VMS.