background image

USER MANUAL

CAMERAS IP H.264 1080P FULLHD 

Page:

 9   

Page:

 9   

DSE SRL - ITALY - WWW.DSE.EU 

RH-BCC1 

- Waterproof camera with IR illuminator 30 m.

RH-BCC1 

- Waterproof camera with IR illuminator 30 m.

GOAL SETTING 

The camera is provided competa adjustable lens from 2.8 to 12 mm focal length so as to allow a perfect adjustment of the area to be 

framed. The camera body is provided with two knobs to adjust the focal length (ZOOM) and the focus (FOCUS) that can be rotated 

without using any tool. It 'also local analog video output with RCA connectors behind the tin lid on the bottom of the camera. This 

output can be used to connect a monitor locally and be able to adjust the lens to the actual position of the camera operation.  

Adjust with the screw of the focal area framed and subsequently act on the screw of the focus in order to optimize the vision.  

CONNECTIONS  

The connections are placed at the end of the cable that protrudes from the camera body. The cable connections is 40 cm long and is 

used to reach a protected box to be prepared to accommodate inside the connectors.

Summary of Contents for RH-BCC1



















































































Reviews: