manualshive.com logo in svg

DSE RH-BCC1, User Manual, Page: 73 / 82

Share
Download
DSE RH-BCC1 User Manual Download Page 73

USER MANUAL

CAMERAS IP H.264 1080P FULLHD 

Page:

 73   

Page:

 73   

DSE SRL - ITALY - WWW.DSE.EU 

from web access router 

An installation of IP cameras is often placed inside a LAN connected to the Internet via a router as in the following scheme 

If we work on the internal PC to the network camera addresses (usually the type 

192.168.XXX.XXX) are directly reachable via browser with software like NetVMS. If we want to connect over the Internet from a PC 

placed elsewhere on the network internal addresses will no longer be accessible and the only visible IP address will be what will our 

router from the WAN side that is towards the outside world of the Internet. This address is assigned by the provider (ISP). And 'advisable 

to get from the provider a fixed address each time you connect. If there is a chance you need to use DDNS services (see above).

However, it is not typing in the browser the IP address of the WAN side Router to connect to the cameras. The router acts as a filter and 

drops every external call that a call from within the network is not paid before. To avoid this you need to enter in the router ports of 

directing instructions according to manufacturers

Summary of Contents for RH-BCC1



















































































Reviews:

No comments