DSE RH-BCC1 User Manual Download Page 5

Page: 5 / 82

USER MANUAL

CAMERAS IP H.264 1080P FULLHD

Page:

DS E SRL - The TALY - WWW.DSE.EU

Installation

RH-TCC1

room Box

RH-TCC1

room Box

RH-TCC1

room Box

LENS ASSEMBLY

The camera body is provided with a rotary dial to adjust the position of the optical sensor. In this way it is possible to focus on any

type of target without having to resort to spacer rings. Once the lens screwed, adjust the focus. The camera has a BNC analog video

output in order to connect possibly a small portable monitor and adjust the focus on location. Acting by turning the adjusting nut if you

are unable to obtain an image in sharp focus with the only mass of the lens.

USE OF OBJECTIVES AUTOIRIS

The camera allows the use of fixed iris lenses, manual and automatic. In the latter case the lens auto iris is provided with a connector

to be connected to the camera body. The camera is compatible with all oiettivi autoiris DC drive type with the following wiring

connections.

Video DC 1 NC

2 VCC Control-

3 GND Drive-

4 Video Drive +

Summary of Contents for RH-BCC1



















































































Search results

Summary of Contents for RH-BCC1

Reviews:

DSE RH-BCC1, User Manual, Page: 5 / 82

Search results

Summary of Contents for RH-BCC1

Reviews: