DSE RH-BCC1 User Manual Download Page 6

Page: 6 / 82

USER MANUAL

CAMERAS IP H.264 1080P FULLHD

Page:

DSE SRL - ITALY - WWW.DSE.EU

REAR CONNECTIONS

•

AUDIO IN - MICROPHONE INPUT - The camera is equipped with built-in microphone, however, a 3.5 mm mini-jack for connecting

an external microphone is available. The choice between the two sources is carried out in configuration. (Impedance 1 KOhm)

•

AUDIO OUTPUT - This 3.5 mm jack allows you to connect the local speakers. This feature allows you to create a two-way audio

conversation between the person in front of the camera and the operator in front of the client PC. (Impedance sup.16 Ohm)

•

Micro SD CARD SLOT - Slot to insert a Micro SD card (up to 32GB) to save aboard the same camera images.

•

12VDC - plug that connect the power supply 220VAC / 12VDC (not included). Alternatively, it is possible to feed the camera POE

directly from the network if the network switch

Summary of Contents for RH-BCC1



















































































Search results

Summary of Contents for RH-BCC1

Reviews:

DSE RH-BCC1, User Manual, Page: 6 / 82

Search results

Summary of Contents for RH-BCC1

Reviews: