manualshive.com logo in svg

DSE RH-BCC1, User Manual, Page: 11 / 82

Share
Download
DSE RH-BCC1 User Manual Download Page 11

USER MANUAL

CAMERAS IP H.264 1080P FULLHD 

Page:

 11   

Page:

 11   

DSE SRL - ITALY - WWW.DSE.EU 

•

ZOOM ADJUSTMENT (1) - Adjusts the focal length of 2.8 to 12 mm 

•

SETTING FIRE (2) - Adjust the focus 

•

Micro SD CARD SLOT (3) - The slot to insert a Micro SD card (32GB max) to save on board images from the same camera is 

placed behind the pond door located on the underside of the camera. 

•

VIDEO OUT (5) - E 'this female RCA output for connecting analog monitor. Connects such as a portable monitor to comfortably 

focus on the goal after installation. The connector is placed behind the pond door located on the underside of the camera. 

CAUTION: this output may not be active if disabled in the camera configuration.

•

RESET (7) - The button to restore the factory parameters, including the network parameters, is placed behind the pond door located 

RESET (7) - The button to restore the factory parameters, including the network parameters, is placed behind the pond door located 

on the underside of the camera. Hold for 5 seconds to restore the factory settings including network data.

•

RED LED (4) - Set behind the pond door on the underside of the camera indicates the correct power of the camera with external 

power supply 12VDC

•

YELLOW LED (6) - Set behind the pond door on the underside of the camera indicates the correct dialogue with the network 

switch.

MOUNTING THE CAMERA 

The camera has a sealed container that allows its installation in the exterior without protections.  

Summary of Contents for RH-BCC1



















































































Reviews:

No comments