manualshive.com logo in svg

DSE RH-BCC1, User Manual, Page: 52 / 82

Share
Download
DSE RH-BCC1 User Manual Download Page 52

USER MANUAL

CAMERAS IP H.264 1080P FULLHD 

Page:

 52   

Page:

 52   

DSE SRL - ITALY - WWW.DSE.EU 

Click FORMAT and wait for the formatting is complete. There are 2 modes of file system for formatting: SD Video and EXT3. For practical 

purposes the two file systems are equivalent: SD Video is a proprietary file system and EXT3 file system is used by GNU / Linux 

systems.

CAUTION

 - To be able to proceed with formatting is necessary that the scheduled recordings and / or are suspended alarm, by acting on 

CAUTION

 - To be able to proceed with formatting is necessary that the scheduled recordings and / or are suspended alarm, by acting on 

the buttons enables / disables the corresponding sections of the RECORD POLICY table already illustrated above. 

The camera records on SD card based on the previously already seen settings. Note that you can not remove the SD card and read it with 

a PC because of the different file system. For viewing of the recordings on the SD card to make the remote search using the NetVMS 

program that allows both to see the recorded files is to export and save them to your PC in .TS format playable with Free VLC player or 

program that allows both to see the recorded files is to export and save them to your PC in .TS format playable with Free VLC player or 

with SNPlayer player included in the camera CD. 

ARCHIVE VIA FTP  

In the first DISK NAME box, select FTP and click MODIFY 

Summary of Contents for RH-BCC1



















































































Reviews:

No comments