DSE RH-BCC1 User Manual Download Page 25

Page: 25 / 82

USER MANUAL

CAMERAS IP H.264 1080P FULLHD

Page:

DSE SRL - ITALY - WWW.DSE.EU

In this tab you set the behavior of the Day / Night DAY / NIGHT MODE - Auto: means to enable the automatic switch to night mode when

it gets dark. Off: means excluding the day / night function.

NIGHTCOLOR - E 'can define whether at night mode keep the color vision or switch to B / N

With the AUTO setting you can set the gain threshold for switching Day / Night (DN) and Night / Day (ND).

AUTOIRIS

If the camera uses an auto iris lens it is possible to set the drive speed. In the case of fixed lens leave the setting to OFF. In AUTOIRIS

OFF mode, the priority of the brightness adjustment is given to the electronic shutter. IRIS SPEED indicates the reaction rate of the lens.

Reduce speed if the lens were to open and close continuously giving a flash effect under certain lighting conditions.

RANGE

Summary of Contents for RH-BCC1



















































































Search results

Summary of Contents for RH-BCC1

Reviews:

DSE RH-BCC1, User Manual, Page: 25 / 82

Search results

Summary of Contents for RH-BCC1

Reviews: