manualshive.com logo in svg

DSE RH-BCC1, User Manual, Page: 46 / 82

Share
Download
DSE RH-BCC1 User Manual Download Page 46

USER MANUAL

CAMERAS IP H.264 1080P FULLHD 

Page:

 46   

Page:

 46   

DSE SRL - ITALY - WWW.DSE.EU 

The RH cameras are able to detect an intrusion through the analysis of the recorded and generate significant alarm actions. In this 

section you can set the parameters of the Motion Detetction determine the actions to take in case of alarm MOTION.

ENABLE 

- Enables the use of the MOTION DETECTION to generate alarms 

ENABLE 

- Enables the use of the MOTION DETECTION to generate alarms 

SCHEDULE

 - you 'can make sure that MOTION is enabled only at certain times of the day or week. For each day of the week there are 3 

SCHEDULE

 - you 'can make sure that MOTION is enabled only at certain times of the day or week. For each day of the week there are 3 

time slots in which to enable the activation of alarms. In the example that follows in the figure it is enabled the alarm function on 

weekdays from 8 to 19 and all day during the weekend. CAUTION - The factory is not enabled any time slot. At least one set to be able 

to activate the detection

Summary of Contents for RH-BCC1



















































































Reviews:

No comments