USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page:
23
Page:
23
DSE SRL - ITALY - WWW.DSE.EU
sensor Configuration
E 'possible to intervene in the camera configuration of the sensor to change the video output.
In view live click the right button and select SENSOR SETUP. A window opens with several folders that we see below.
IMAGE ADJUST
Adjusts Brightness, Saturation and Contrast in the image.
The brightness adjustment acts on the 3 parameters of the camera: The electronic iris (shutter), the diaphragm of the lens iris and gain.
These three parameters are changed in the order indicated that if the brightness of the image does not correspond to the camera set
value will act as follows:
1. Changing the electronic shutter to achieve the required brightness
1. Changing the electronic shutter to achieve the required brightness
2. If one point unsuccessfully change IRIS lens to achieve the brightness
2. If one point unsuccessfully change IRIS lens to achieve the brightness
request
3. If step 2 without changing the GAIN successfully to achieve the brightness
3. If step 2 without changing the GAIN successfully to achieve the brightness
request
4. If step 3 without success the request brightness is not reached Obviously it is necessary that the following settings SHUTTER,
4. If step 3 without success the request brightness is not reached Obviously it is necessary that the following settings SHUTTER,
GAIN and AUTOIRIS allow the automatic adjustment, otherwise the camera will not change the parameter set as a fixed.
SHUTTER CONTROL