manualshive.com logo in svg

DSE RH-BCC1, User Manual, Page: 42 / 82

Share
Download
DSE RH-BCC1 User Manual Download Page 42

USER MANUAL

CAMERAS IP H.264 1080P FULLHD 

Page:

 42   

Page:

 42   

DSE SRL - ITALY - WWW.DSE.EU 

Some RH series cameras have alarm inputs and outputs that are configurable in this section. 

Between the two of the alarm input terminals must apply a voltage between 5 and 12VDC. The output is relay type (NO / NC 

programmable) and can directly drive up to 300mA 12VDC

ALARM IN

 - Select the camera alarm input. 

ALARM IN

 - Select the camera alarm input. 

NAME

 - Edit an input distinctive name 

NAME

 - Edit an input distinctive name 

VALID VOLTAGE LEVEL -

 It determines the type of operation. With HIGH is meant that the alarm is active in the presence of voltage. 

VALID VOLTAGE LEVEL -

 It determines the type of operation. With HIGH is meant that the alarm is active in the presence of voltage. 

VALID VOLTAGE LEVEL -

 It determines the type of operation. With HIGH is meant that the alarm is active in the presence of voltage. 

With LOW it means that the alarm is active to miss the tension.

ALARM OUT

 - Select the alarm output 

ALARM OUT

 - Select the alarm output 

NAME

 - Edit output a distinctive name 

NAME

 - Edit output a distinctive name 

VALID SIGNAL

 - Determines the operation of the alarm contact. CLOSE it indicates that the contact is normally open (NO) and closes in 

VALID SIGNAL

 - Determines the operation of the alarm contact. CLOSE it indicates that the contact is normally open (NO) and closes in 

the event of an alarm. OPEN indicates that the contact is normally closed (NC) and opens in the event of an alarm.

ALARM MODE OUT

 - Indicates the output drive mode. SWITCH MODE indicates that the relay closes or opens (depending on its logic) 

ALARM MODE OUT

 - Indicates the output drive mode. SWITCH MODE indicates that the relay closes or opens (depending on its logic) 

in a continuous manner for the entire duration of scheduled activation.

 PULSE MODE

 It indicates that the relay is activated in an 

in a continuous manner for the entire duration of scheduled activation.

 PULSE MODE

 It indicates that the relay is activated in an 

in a continuous manner for the entire duration of scheduled activation.

 PULSE MODE

 It indicates that the relay is activated in an 

intermittent manner with 

Summary of Contents for RH-BCC1



















































































Reviews:

No comments