DRESSTA 515C, Operator'S Manual

Page: 193 / 205

SECTION 6
SPECIFICATIONS
Page 28
OM515C520C99/1E DRESSTA
SPECIFICATIONS
6.8.1. GENERAL SPECIFICATIONS OF 515C AND 520C LOADERS
The following specifications are for the standard configuration of 515C, 520C wheel loaders
equipped with ROPS-FOPS cab, standard bucket and standard tires.
Specification 515C 520C
Rated bucket capacity with spillboard
1)
1.53 [m
3
] 1.91 [m
3
]
Bucket width 2390 [mm] 2590 [mm]
Dump clearance
2)
2740 [mm] 2820 [mm]
Reach
2)
1040 [mm] 1020 [mm]
Breakout force 96.30 [kN] 120.2 [kN]
Static tipping load
3)
•
straight
65.70 [kN] 82.8 [kN]
•
full turn
58.60 [kN] 73.1 [kN]
Operating weight 9060 [kg] 10100 [kg]
Load capacity [kN]
±
10%
29.30 [kN] 36,5 [kN]
Overall length with bucket @ carry 6070 [mm] 6550 [mm]
Overall length with bucket on the ground 6120 [mm] 6580 [mm]
Maximum Overall Height 4600 [mm] 5050 [mm]
Turning radius, outside corner of bucket @ carry 5160 [mm] 5590 [mm]
Articulation 40 [
°°
]
40 [
°°
]
Axle oscillation 12 [
°°
]
13 [
°°
]
1)
a machine can be equipped with a bucket of bigger capacity or with optional attachment (Refer to
Par. 6.4)
2)
the value increases or decreases according to the tire size.
3)
machine stability, weight and performance are specified for a machine standing on hard level ground
and can be affected by the machine configuration and optional equipment
NOTE: Performance specified per SAE J732.
6.8.2. CAPACITIES
Specification 515C 520C
Refill [l] Service [l] Refill [l] Service [l]
Fuel tank 132.5 172
Cooling system 30 33
Front axle 15 16.5
Rear axle 15 16.5
Hydraulic system (loader and steering) 65 85
Hydraulic tank 42 50
Transmission system 27 30
Transmission 18 22
Engine and filter 16.4 16.4
Service brake system 3.8 3.8
Steering gear 0.33 0.33
Air conditioner 1.22 [kg] 1.22 [kg]