DResearch – User Manual TeleObserver MR3180
2011-02-03
28
3
Device Configuration - The main program CMS and its menu
.
To set up a connection to the device, an outstation with the name of your choice (e.g.
MR3180_001) and the IP address of the MR3180 (Default: 192.168.0.1) has to be set up in the CMS
module SystemMangement
Outstaion.
Vision - Display of live pictures
With the MR3180 this module can be used for the installation of a whole system for adjusting and
function checking the cameras. Proceed as follows:
Create a connection between PC and device (Ethernet).
Start the CMS and afterwards Vision.
Connection to the device
Connect.
After successfully establishing the connection you will see the camera pictures.
ImageFinder – search of recorded data
Enables the searching of recorded video data. The various types of archives are shown colour coded:
ring archive (green), alarm archive (red) and pre-alarm archive (yellow). Archives are automatically
established for each camera which is activated for recording in the system management module.
Proceed as follows:
Creating a connection between PC and device (Ethernet).
Start the CMS and then ImageFinder.
Connection to the device
Connect.
Once the connection is established the recorder’s individual archives will be shown.
SystemManagement – module for device configuration
Configuration should only be conducted by the manufacturer’s authorised specialist. The
manufacturer accepts no liability or responsibility if damage results from improper treatment or
incorrect settings.
Create a connection between the PC and the recorder (Ethernet).
Start the CMS and then SystemManagement.
Load the device configuration
Received.
After the connection is made the device configuration will be loaded.
The following section will deal in detail with the menu of the SystemManagement module and the
configuration of the device.
The
CMS
consists
of
the
modules
Vision,
ImageFinder and SystemManagement. Only the
system management module is relevant for the
configuration of the recorder. There is a detailed
description of the CMS software in the software
manual.
