DResearch – User Manual TeleObserver MR3180
2011-02-03
33
3.1.1.1
System :: Basic settings
Once a hard disk is put in a different MR3180 unit all the data on the hard disk will be
automatically deleted after 30 seconds, if this is set up in the device configuration. (It is the
standard setting under Archive settings
action when exchanging hard disks). This is a
security mechanism!
For these 30 seconds the HD LED on the front of the device flashes yellow. During this time
you can switch the machine off if the data are not to be deleted.
After 30 seconds the data are irretrievably deleted and are no longer recoverable! The hard disk is
automatically adopted by the recorder and prepared for recording. (Exception: the HD is
password-protected and this is not stored in the device configuration. In this case the disk will be
declined and the HD LED on the device lights red.)
We recommend that all hard disks which are to be swapped from one device into another should
be routinely formatted in the TTU. In this process the password for the storage device is replaced
and any problems with disk adoption in the other unit are avoided.
