DResearch – User Manual TeleObserver MR3180
2011-02-03
47
3.1.1.12 Video output :: MultiView
3.1.1.13 Video output :: Transfer order
The switching time, after which the view is switched to the next camera picture or multi-view
format is determined by the “Video output”
“…switch after...“ field in the basic settings.
The automatic transfer order stops at source OFF. After that you have to switch manually.
For this reason the source OFF shouldn’t be admitted into the video output transfer.
QuadView with the analogue cameras 1-4 is set as standard. However several views can be
defined which can be activated for a switching at the control monitor.
If you want to set one of these views as the start up view set this under
System :: basic settings in the “video output” field
“Standard output“.
Store new viewing formats
here by pressing the NEW
button
and
configure
the
display as you want.
Several types of views are
available for selection:
Quad - 4 cameras
Nona - 9 cameras
1plus (5) - 6 cameras
1plus (7) - 8 cameras
A maximum of 9 camera
signals can be displayed in a
view.
Here you determine the switching
sequence. You can select from all
the camera entries, even the IP
cameras which are not activated
for recording.
Bypass means that the camera
signal goes directly from video-IN
to video-OUT. This setting relieves
the recorder but means no overlay
of
additional
information
is
possible.
