Vigor3200 Series User’s Guide
269
4.
After finishing the above configuration, the equipment connecting to VigorSwitch Port
15
,
16, 17 and 18 can get the corresponding IP address(es) of the network segment.
The equipment connecting to VigorSwitch Port 15 can get the IP address of
192.168.1.0/24
The equipment connecting to VigorSwitch Port 16 can get the IP address of
192.168.3.0/24
The equipment connecting to VigorSwitch Port 17 can get the IP address of
192.168.5.0/24
The equipment connecting to VigorSwitch Port 18 can get the IP address of
192.168.7.0/24
5.
To make any two of VLAN groups of Tag Based VLAN linked with each other, just
check the boxes of the ones in the field of
Inter-LAN Routing
in the page of
LAN >>
General Setup
. Refer to the following figure. LAN2 and LAN3 are linked.
Summary of Contents for Vigor3200 Series
