Vigor3200 Series User’s Guide
93
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
PPP/MP Setup
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP. If you want to connect to Internet all the time, you can
check
Always On
.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action.
IP Address Assignment
Method (IPCP)
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed
IP field. Please contact your ISP before you want to use this
function.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to
32
public IP addresses other
than the current one you are using.
Type the additional WAN IP address and check the Enable box.
Then click OK to exit the dialog.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC
Address
or specify another MAC address by typing on the
boxes of MAC Address for the router.
Specify a MAC Address –
Type the MAC address for the
router manually.
After finishing all the settings here, please click
OK
to activate them.
Summary of Contents for Vigor3200 Series
