Draytek Vigor3200 Series, User Manual

Page: 256 / 319

Vigor3200 Series User’s Guide 246
such problem, you might change port number for CPE.
Periodic Inform Settings The default setting is Enable . Please set interval time or
schedule time for the router to send notification to CPE. Or
click
Disable to close the mechanism of notification.
STUN Settings The default is Disable . If you click Enable , please type the
relational settings listed below:
Server IP – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the minimum period. The default setting is “60 seconds”.
Maximum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number
as the maximum period. A value of “-1” indicates that no
maximum period is specified.
4
4
.
.
1
1
4
4
.
.
3
3
A
A
d
d
m
m
i
i
n
n
i
i
s
s
t
t
r
r
a
a
t
t
o
o
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password.
Old Password Type in the old password. The factory default setting for
password is
“admin” .
New Password Type in new password in this field.
Confirm Password Type in the new password again.
When you click OK , the login window will appear. Please use the new password to access
into the web configurator again.