30
Fig 63
3. Press
【
F3
】
to select the unit of concentration (Fig 64).
Fig 64
4. Push the blank cuvette into the Reference Light Path and Main Light
Path , then press
【
ZERO
】
for blanking .
5. Pull the sample cuvette into Main Light Path, press
【
START
】
to test
the sample. The test result will be displayed on the screen (Fig 65).
Fig 65
6. If there is more than one sample, repeat step 5 for the next sample.
7. Press the key
【＜)
or
【＞】
for searching. Input the sample number
(Fig 66), the result will be displayed on the screen. Press the key
【∧】
or
【∨】
to browse the test results one by one.
