5
2. Place the instrument in a suitable location away from direct sunlight.
In order to have the best performance from your instrument, keep it as
far as possible from any strong magnetic or electrical fields or any
electrical device that may generate high-frequency fields. Set the unit
up in an area that is free of dust, corrosive gases and strong vibrations.
3. Remove any obstructions or materials that could hinder the flow of air
under and around the instrument.
4. Use the appropriate power cord and plug into a grounded outlet.
5. Turn on your spectrophotometer. Allow it to warm up for 15 minutes
before taking any readings. We suggest you then do the Calibrate
System with the Search 656.1nm to set the wavelength to the
deuterium lamp emission line.
NOTE:
This symbol means Caution, Risk of Danger.
Operation:
Prepare the spectrophotometer
Fig 3 is the control panel. User can perform all operations by pressing the
keys and all the results and operation information are displayed on the LCD.
