10
Fig 10
Use numeric keypad to input wavelength (Fig 11).
Fig 11
Press
【
ENTER
】
to change the wavelength from 656.1nm to
450.0nm,and then blank; After blanking, the screen displays as Fig
12.
Fig 12
※
Load or delete data or curve
(Take the “WL scan” test For example)
Press
【3】
in Fig.7 go into “WL scan”. After
【
LOAD
】
being pressed,
the first file (ABC.wav)in memory will appear on the bottom line of
screen .Showed as Fig 13. Press
【∧】
or
【∨】
to browse the files stroed
in memory. Then if :
1. The key
【
ENTER
】
be pressed, the file selected will be loaded and
displays on the screen. Fig 14.
Note (1)
The file selected must match “WL scan” test’s type. If not
，
the
“file type error…” will appear on the Right of top line.
(2)
Different test has different file type. Refer to table 1 on
Page 12
.
2. The key
【
CE
】
be pressed, the file selected
will be deleted by
