Installation
|
Installation instructions
|
Dräger Interlock
®
5x00/7x00
29
4.7
Connecting the door contact
It is possible (optional) to install the device in such a way that it is activated by
opening the door lock or the door alone. This reduces the waiting time for the
driver until the device is ready for operation and for the driver to provide a
breath alcohol test.
●
Connect the white cable on the device (connection 15, (see "Description of
the connection leads on the control unit", page 21)) to a lead on the vehicle
that is connected to 12 V when the door opens, for example via the interior
light.
4.8 Fixing
the
components
4.8.1 Control
unit
1. Secure the control unit with cable ties onto a support (such as the steering
column). Thread the cable ties through the tabs of the control unit and
secure onto the support or wrap the cable ties around both the support and
the steering column.
Example:
2. Secure cables from the control unit; where possible, lay cables out of sight.
3. Plug in spiral connection cord for handset into the control unit.
4. Re-fit covers on the steering column.
4.8.2 Handset
To mount the handset in the vehicle, use the dedicated holster.
WARNING
Do not install holster for the handset in front of air-bags.
●
Decide upon mounting location ensuring minimal obstruction by the handset
and easy accessibility for the driver.
●
Fix holster with screws. Ensure adequate clearance behind fixing screws so
that they can be screwed in far enough.
4.9 Functional
test
NOTICE
After installation, reconnect the vehicle battery.
Test the function of the device in line with the instructions for use.
1. The Interlock wakes up when the ignition is switched on (Connection 15) or
via a digital input (e.g. vehicle interior lighting switched on/vehicle unlocked).
4947
9
1
Control unit
2
Cable ties
3
Steering column
1
2
3
2
49480
AIRBAG
