Operation
Edition 03 / 69 06 898
57
FTS 8000
5.6.6
Overview screen - Exercise point parameters (Administrator)
Fig. 75 Exercise point parameters flash over (administrator)
Overview screen - Exercise point parameters displays the various parameters for the
fireplaces. The screen is only visible for the administrator. The administrator can modify the
values that are not grayed out with his/her login, such as the flame height of the individual
flame levels.
Flame height
Setting of the flame height for the individual flame levels
•
Level 3/2/1:
Setting of the flame height for the
individual flame levels. Level 3 here is the highest
flame level and level 1 is the lowest flame level. Every
value change must be confirmed and therefore saved
by pressing the Enter key on the keyboard.
i
i
NOTICE
The administrator must be logged on to view and edit the exercise point parameters.
i
i
NOTICE
All changed values must be confirmed individually using the Enter key on the keyboard so
that the new values entered are saved. The values are not saved otherwise and are reset
to the original values.
i
i
NOTICE
It is necessary to start by entering the highest flame level (Level 3) followed by the next
flame level down (Level 2) and finally the lowest flame level (Level 1). If this sequence is
not followed, the newly entered values are not saved. The value of the flame level one
lower than the current one must be smaller than the value of the flame level one higher
than the current, otherwise the value is not saved (value: 100 %
≥
level 3 > level 2 >
level 1
≥
0 %).
Fig. 76 Flame height
