background image

EN

Caution: 

 

Two Person Lift Required. PHANTOM Cure Station is a long, heavy object.

• Hot Surface. Do not touch the internal heating unit during or after operation. 
• Disconnect PHANTOM Cure Station from power source when servicing.

Cleaning Information

Over time moisture or evaporative residue may build up inside of the station. Wear appropriate gloves and wipe down 
first with a damp absorbent cloth or paper and then give a final wipe down with a dry absorbent cloth or paper.

IMPORTANT Power Cable Information

Please, ensure that your PHANTOM Cure Station is electrically rated to operate with the AC power available in your 
location. North America voltage: 110 VAC. Europe and Japan voltage: 220 VAC.

• Only use the power cable that was provided with your PHANTOM Cure Station.

• Do not plug the equipment power cable into an electrical outlet if the power cable is damaged. 

• To prevent electric shock, plug the equipment power cable into properly grounded electrical outlets. If the equip-
ment is provided with a 3-prong power cable, do not use adapter plugs that bypass the grounding feature, or remove 
the grounding feature from the plug or adapter. 

• Connect the power cable to a grounded electrical outlet only. 

• If you use an extension power cable, ensure that the total ampere rating of the products plugged in to the extension 
power cable does not exceed the ampere rating of the extension cable. 

• If you must use an extension cable or power strip, ensure the extension cable or power strip is connected to a wall 
power outlet and not to another extension cable or power strip. The extension cable or power strip must be designed 
for grounded plugs and plugged into a grounded wall outlet. 

• If you are using a multiple-outlet power strip, use caution when plugging the power cable into the power strip. 
Some power strips may allow you to insert a plug incorrectly. Incorrect insertion of the power plug could result in 
permanent damage to your equipment, as well as risk of electric shock and/or fire. Ensure that the ground prong of 
the power plug is inserted into the mating ground contact of the power strip. 

• Be sure to grasp the plug, not the cable, when disconnecting equipment from an electric socket.

Summary of Contents for PHANTOM 2.0


















Reviews: