EN
B
C
D
G
A
E
15
min
!
Place ski(s)/snowboard on a flat surface for a 15 minute soak period.
After the soak period, wipe down ski(s)/snowboard vigorously with a
clean paper towel. The aim should be for the ski to have a polished
sheen, with no pools of excess PHANTOM. This wipe down is key for
getting complete and timely cures in the Cure Station. Also clean any
excess drippings that dripped onto the top sheet and edges with a
damp rag or alcohol wipe. PHANTOM can leave a stain on top sheets
if left on. A WD-40 type cleaner/degreaser can help remove a stain. Or
wiping down with a very hot wet rag.
Note: Bases should be treated at a minimum shop temperature of 58°F/15°C. For optimum results bases should be at 75 -
100 F prior to applying PHANTOM.
STEP 3
With any binding brakes securely strapped flat, or snowboard bindings off, insert into the cure station on the supplied stands
with tips facing the heater (to improve cure times) and close the door. Minimise time the door is open to retain internal Cure
Station heat.
A
. UV lights will NOT come on unless the door is closed and the limit switch in the upper left corner
is activated.
B.
If the internal temperature is below a threshold the cure station may go through a pre-heat period
before the timer begins the countdown.
Once the first cycle is done the base should be dry with light PHANTOM residue. If wetness exists, wipe off with a paper
towel and continue curing for another 5-10 minutes.
STEP 4
