EN
HOW TO OPERATE:
Turn on the main power switch on the back left (
A
).
Triple display button (Cure Station version 2 and up)
:
a. With the door closed, press Preheat once. Both the heater and fan and the 4 UV lights should be on
during Preheat.
i. After temperature is reached, the station will maintain this temperature for a maximum of two
hours and will automatically shut off if there is no activity.
b. Insert the gear base side up centered under the lights, close the door, and press the
Start
button.
The cure cycle timer will only be initiated at this point if ‘Ready to Cure’ is displayed. Have the
door open for minimum time to retain heat and ensure efficient curing.
c. To cancel at anytime during Preheat, or a cure cycle, press
Cancel
.
NOTE:
• Initial preheat can take up to 30 minutes depending on ambient temperatures.
• The station is not designed for shop temperature below 58°F/14°C or may take longer to preheat.
• The first few heat cycles may have a slight burning odor while the heating elements clean off any
manufacturing oils or dust.
STEP 1
STEP 2
