EN
OVERVIEW
PHANTOM Cure Station™ and PHANTOM™ are designed to work together in a shop environment to provide consistent
and rapid UV cure for skis and snowboards. The formula has been specifically designed and tested with the temperature
and UV concentration and combinations of wavelengths created by this equipment. No other processes other than the
cure station described or in the natural outdoor strong sunlight cure instructions should be attempted.
Please read the PHANTOM bulk application instructions and warnings before beginning.
Minimum recommended shop temperature is 58°F/15°C for a reasonable 15-30 minute cure station preheat. Longer
preheat may be required at lower starting ambient temperatures.
Refer to Storage and Handling instructions (pg 12) for correct care of your PHANTOM CSF.
Each bulk bottle contains 250ml of PHANTOM liquid.
Disposal: If entire contents of individual packets or bulk containers are not used up, remaining liquid can be poured into
absorbent cloth or paper and disposed of once entirely dry.
Please contact DPS Skis at +1.801.413.1737 or [email protected] if you have any troubles or questions
regarding the PHANTOM Cure Station™ or PHANTOM™.
Manufacturer:
Drake Powderworks, Inc.
DBA: DPS Skis
647 South 600 West
Salt Lake City, UT 84101
USA
Phone: +1.801.413.1737
Email: [email protected]
Website: www.phantomglide.com
Voltage: 110 VAC
Nominal Current: 6 A
Frequency: 60 Hz
Made in: Salt Lake City, Utah, U.S.A.
Voltage: 220 VAC
Nominal Current: 3 A
Frequency: 50 Hz
Made in: Salt Lake City, Utah, U.S.A.
Caution:
To identify general caution when using the product.
Used for less serious health hazards like skin irritation.
Flammable
Definitions of symbols:
