background image

EN

For local European 24/7 spill or accidents service in specific countries, call your regional poison control center, 
or the global service listed which has our SDS on file and product information.

Best Practices:

•  Store unopened bulk bottles over time in a cool dry place.
•  Completely finish a bulk bottle within 9 months of opening.
•  Always close the lid after each application.
•  Avoid direct UV light, except for curing inside the box.
•  Use protective gloves to avoid contact with skin.
•  PHANTOM is harmful if ingested. Clean up spills and keep away from children and pets.  
•  Wear protective eyewear and mask while rotobrushing.
•  Apply in a well ventilated area
•  Store test tubes upside down on top of a paper towel/absorbent cloth

Servicing Items (available by contacting DPS):

•  Fuse 10A 250VAC 5X20MM
•  Power Cord 110v Type B - IEC 320 connection (NA/JP)
•  Power Cord 220v Type F - IEC 320 connection (Europe)
•  Power Cord 220v Type J - IEC 320 connection (Switzerland)
•  Power Cord 220v Type G - IEC 320 connection (UK)
•  Power Cord 220v Type I - IEC 320 connection (Southern Hemisphere)
•  USB cord A Male × B Male 3’
•  PHANTOM UV Bulbs
•  Replacement Limit Switch (G)
•  Extra gloves, masks, squeegees, available upon request.

In the event of a medical or chemical emergency contact ChemTel, North America
1-800-255-3924 or Wor1-813-248-0585. All other non-emergency inquiries about the
product should be directed to DPS Skis: +1-801-413-1737 or [email protected].

Summary of Contents for PHANTOM 2.0


















Reviews: