EN
HOW TO UPDATE PHANTOM CURE STATION FIRMWARE - PC
PC Download Instructions
• Go to ‘PC Application Downloads’ in the Google Drive ‘Cure Station Firmware Update’ folder
• Download the XLoader.zip
• Exctract all files from the .zip
• Inside of the XLoader Folder click on the XLoader application
How to use XLoader to load a new version of PHANTOM Cure Station Firmware
• The left screenshot shows the window that Xloader displays when it starts.
• Go back to the ‘Cure Station Firmware Update’ folder and find the ‘Firmware Updates’ within.
• Determine if you have a 3 button or 1 button Cure Station
• Download the correlating .hex file in the 3 button or 1 button folder
• Click the ‘...’ in the CLoader application and find the .hex file in your downloads
• Select the file
• Be sure that all settings are set as shown below (Device: UnoATmega328, Baud rate: 115200)
• The COM port is specific to your unit. The dropdown will only list your COM#
• Press the “Upload” button.
• When the .hex file has been loaded into the Arduino/X-controller the right screenshot will show the size of
the file uploaded, or an error message if the upload fails.
