HSLED INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
Wall Mounting
Mount to a weatherproof junction box and cover plate (not
supplied) as shown. To ensure weatherproof seal, apply
weatherproof silicone sealant back of junction box. This is
especially important with an uneven wall surface.
1.
Thread fixture into
Cover Plate
. Seal arm thread using
teflon tape or silicone sealant.
2.
Connect wires as shown in the wiring diagram
3.
Attach cover to
Junction Box
.
4.
Aim floodlight in the direction desired and tighten
locknut and
arm Screw
.
5.
Be sure the
Weep Hole
on hood is oriented such that it
does not allow accumulation of water.
Cover Plate
ground Mounting
Mount to a Mighty Post(RAB Cat# MP19) as shown.
1.
Thread fixture into
Mighty Post Cap
.
2.
Connect wires as shown in the wiring diagram and place
inside the
Mighty Post
.
3.
Place
Mighty Post Cap
on the
Mighty Post
.
4.
Aim floodlight in the direction desired and tighten locknut
and
arm Screw
.
5.
Be sure the
Weep Hole
on hood is oriented such that it
does not allow accumulation of water.
Junction Box
Mighty
Post Cap
Mighty Post
arm Screw
arm Screw
Weep Hole
Weep Hole
Note: These instructions do not cover all details or variations in
equipment nor do they provide for every possible situation during
installation, operation or maintenance.
iMPortant
rEad CarEFullY BEForE inStalling FiXturE. rEtain tHESE inStruCtionS For FuturE rEFErEnCE
.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required
for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
Warning: Make certain power is oFF before installing or maintaining fixture. no user serviceable parts inside.
