Dover Triton 96 Series, User Manual

Page: 41 / 62

TRITON SYSTEMS, INC.
4-19
FULL MOTION VIDEO - USER GUIDE SECTION 4 - INSTALLATION/REMOVAL
Step 7: Apply power and verify
proper operation.
Follow these steps to apply power and verify proper
operation of the FMV unit.
NOTE: If the FMV does not appear to be working
properly once power is applied, see Section 6,
Maintenance, for help in locating and correcting
the problem.
7-1 Ensure the ATM dispenser mechanism has
been reinstalled, if necessary. Connect the
ATM power cord to the AC outlet. Turn the ATM
power switch to ON (I). Close and lock the ATM
upper enclosure.
7-2 Plug the Line Sharing Device power module into
an AC outlet.
7-3 Plug the FMV power cord into the surge
suppressor module, as shown in Figure 68.
7-3 The FMV telephone-line setup and unit
initialization will be performed in Section 5:
Operation.
7-4 Press the green power-on button on the rear
panel of the FMV Door Assembly chassis (See
Section 3, Components, for location of this
pushbutton). The green power-on LED should
light and the FMV chassis fan should also
operate.
7-5 After a few moments the FMV screen will begin
to display content (if applicable, audio content
should also be heard).
7-6 Adjust the screen brightness and volume
controls for the best picture and sound, as
necessary (see Section 5, Maintenance, for
location and adjustment procedures for these
controls).
7-7 Close and lock the FMV Door Panel Assembly
using the provided access key.
Figure 4-68. Secure 4-Pin Modular Cable
in ATM Upper Enclosure cable clip.