Dover Triton 96 Series, User Manual

Page: 29 / 62

TRITON SYSTEMS, INC.
4-7
FULL MOTION VIDEO - USER GUIDE SECTION 4 - INSTALLATION/REMOVAL
2-5 Connect J1 of the adapter board to the power
supply cable that was disconnected from J8, as
shown in Figure 4-20.
2-7 Connect the ventilation fan power cable
connector to the corresponding jack on the
adapter board, as shown in Figure 4-21.
2-8 Connect the adapter board to J8 on the Card
Cage backplane, as shown in Figure 4-22.
2-9 If installing the FMV 4-Pin Modular (telephone-
line) Cable using a Line Sharing Device, leave
the power supply access cover open and
proceed with Step 3, Option A. Otherwise, close
and secure the power supply access panel,
connect the power plug and close the lower
security container access door.
Figure 4-21. Connect Fan Power Cable
to J4 on Adapter Board.
Figure 4-22. Adapter Board connected
to J8 on Card Cage back plane.
Figure 4-20. Connect Power Supply
Cable to J1 on Adapter Board.