![Dover Triton 96 Series User Manual Download Page 35](http://html1.mh-extra.com/html/dover/triton-96-series/triton-96-series_user-manual_2524808035.webp)
TRITON SYSTEMS, INC.
4-13
FULL MOTION VIDEO - USER GUIDE
SECTION 4 - INSTALLATION/REMOVAL
3b-4 Place a cable clip on the upper back wall of the
ATM back housing, as indicated in Figure 4-43.
Pull any remaining slack in the 4-Pin Modular
Cable into the Hightopper. Form one or more
loops in the remaining cable length as needed
to secure the loop on the cable clip, leaving
about 8-10 inches of the cable free, as shown
in Figure 4-44.
Step 4: Connect Surge Suppressor
Module.
The external surge suppression module provides
additional electrical protection for the telephone lines
to the ATM/FMV. Connect the module according to the
following instructions:
4-1
If the Line Sharing Option is used the ATM
telephone line serves both the ATM and the FMV
unit. Disconnect the ATM telephone line from
the existing facility connector. You will connect
this cable to the surge suppressor module in a
later step.
If the Line Sharing Option was NOT used, the
FMV modular cable should be available at the
access hole of the ATM cabinet.You will connect
this cable to the surge suppressor module in a
later step.
4-2
Note the location of the LINE and EQUIPMENT
jacks on the surge suppressor module. Hold the
module as shown in the figure, so that the LINE
jack is on the left, as shown in Figure 4-45.
4-3
Connect a modular patch cable to the LINE jack
on the surge suppressor module, as shown in
Figure 4-46.
Figure 4-43. Secure 4-Pin Modular
Cable in ATM Back Housing cable clip.
Figure 4-45. Note location of LINE jack (on
the left).
Figure 4-44. Secure 4-Pin Modular Cable
in ATM Upper Enclosure cable clip.
Figure 4-46. Connect modular patch cable
to LINE jack.
Summary of Contents for Triton 96 Series
