Dover Triton 96 Series, User Manual

Page: 26 / 62

TRITON SYSTEMS, INC.
SECTION 4 - INSTALLATION/REMOVAL
4-4
FULL MOTION VIDEO - USER GUIDE
Step 2: Install Hightopper
Ventilation Fan Power Cable.
A ventilation fan on the rear panel of the Hightopper
housing provides airflow to keep the temperature of
the Hightopper within normal levels. This fan receives
power from the ATM power supply.
There are two methods of connecting the power cable;
the method used will depend on the type of Card Cage
backplane installed in the ATM:
•
The first type of backplane provides a built-in jack
to receive the FMV power cable plug.
•
The second type of backplane requires that a
special adapter board be installed on the
backplane to tap power for use by the FMV. The
FMV power cable plugs into this adaptor board.
2-1 From within the Hightopper, locate the
ventilation fan power cable. One end of the cable
is attached to the body of the ventilation fan (see
Figure 4-8).
Route the free end of the cable through two
cable clips and into the ATM (see Figures 4-9
through 4-11).
Figure 4-9. Routing Fan Power Cable
through cable clip.
Figure 4-8. Ventilation Fan Power Cable.
NOTE
If you remove any other cables to gain access
to J8, make a note of the correct placement of
these cables. Remember to properly reconnect
these cables before closing and securing the
power supply panel!
Figure 4-7. Location of cable clips.