Dover Triton 96 Series, User Manual

Page: 45 / 62

SECTION 5 - OPERATION
TRITON SYSTEMS, INC.
5-3
FULL MOTION VIDEO - USER GUIDE
FMV Operation
The FMV is a self-contained multimedia presentation
system. Once initialized, the FMV operates
automatically, presenting multimedia content without
the need for operator intervention. Periodic updates
to the content can usually be handled behind the
scenes, transparent to the normal operation of the
ATM.
On those occasions when a more extensive update to
the multimedia content stored in the FMV is required,
operator (or third party service personnel) action may
be needed to physically install an update media disk
(CD-ROM).
Sources of Multimedia
Content
An initial set of basic multimedia content will be pre-
installed on the FMV at the factory. Additional content
and updates will usually be provided via arrangement
with the FMV media service provider.
Currently, the FMV can receive content using the
following methods:
•
Telephone-LIne Interface
•
CD/DVD
Telephone-Line Interface
This communications link provides a channel through
which original multimedia content can be downloaded
over the commercial telephone line. It also enables
updates to dynamic content, such as stock quotes or
weather reports.
The FMV unit uses the telephone line connection to
establish communications with a remote content
service provider. The FMV downloads periodic updates
and time-sensitive content from the server.
CD/DVD
The FMV includes a CD/DVD drive, enabling hundreds
of megabytes of multimedia content to be conveniently
transferred from CD or DVD media to the FMV internal
hard drive.
See the nest section for instructions on loading
multimedia content using the CD/DVD drive.
Loading Multimedia
Content into the FMV
Periodic content updates can be received from a
service provider using the ATM telephone-line
communications interface or CD or DVD based storage
media. If any updates are received over the telephone
line they are automatically incorporated into the
multimedia presentation.
If a CD or DVD-based update is required, follow these
steps to load the CD or DVD:
•
Step 1: Open the FMV
•
Step 2: Open Disk Tray
•
Step 3: Insert Disk
•
Step 4: Close Disk Tray
•
Step 5: Close the FMV
Step 1: Open the FMV
Unlock and open the FMV Door Panel and lower the
panel to the access position, as shown in Figure 5-1.
Step 2: Open Disk Tray
Press the eject button on the CD/DVD drive (see Figure
5-4). The disk tray will extend slightly (see Figure 5-5).
Grasp the tray and extend it to the fully open position
(see Figure 5-6).