Dormakaba LA GARD 700 Series System User'S Manual Download Page 62

Page: 62 / 76

dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 61

desire is to use the new features, that is

mandatory. SW, the FW files, and the

communications cable are required to perform

the FW update.

Installing entry-locks and re-installation of the

keypad may reset the auto-open feature if the

new keypad is at a lower FW level than the

lock(s).

1.1.3.2

27 Sept

2021

Added support for 3 new Models:

702D: 702 features with a display

703B: 703 features plus dual credential feature

704B: 704 features plus dual credential feature

Changed “Entry” to “Keypad” on system menu

Various other minor bug fixes.

1.2.3.4

3 Oct 2022

Added additional audits:

Forced Combination Change

Access Schedule changed

Access Schedule Lock Assignment changed

Holiday Change

Observe DST setting changed

Added time lock restrictions for when the system is in a

time locked situation for the Manager to be able to

immediately change the definition.

Added ability to change combination on uninstalled

display model keypads.

Added feedback when Wrong Try Penalty period has

completed.

Added ability to see system information if not installed

for keypad models with a display.

Added enforcement for Master User to change

combination when installed. Also that the Master User

cannot set combo back to the factory default.

Added other informative messages for keypad models

with a display.

Extended time between key presses before keypad

goes to sleep.

Added support for FW update when not installed.

Added support to change combo when uninstalled for

non-display keypad models.

Newly added users will now have open and audit

privileges by default.

Added support for Observe DST setting for the 702

model.

Added Reset Box blink in all cases when reset is

attempted.

Various other minor bug fixes.

NOTE: When one of the devices (keypads or locks) is at this

firmware level, the other devices must be updated to be

configurable via software

Summary of Contents for LA GARD 700 Series













































































Search results

Summary of Contents for LA GARD 700 Series

Reviews:

Related manuals for LA GARD 700 Series

Brands by name

Popular brands

Dormakaba LA GARD 700 Series, System User'S Manual

Search results

Summary of Contents for LA GARD 700 Series

Reviews:

Related manuals for LA GARD 700 Series

Brands by name

Popular brands