dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 44
4.
Input the User ID and Combination.
5.
The lock will open. After a few seconds, the lock will close.
3.14.3 Cancel a Time Delay
If desired, a Time Delay period can be cancelled. Some things to know when cancelling a Time Delay:
•
The opening activity is cancelled.
•
The Time Delay Period will end, and there will be no Confirmation period.
•
The Lock cannot be opened.
•
Re-authentication will initiate a new Time Delay period.
3.14.3.1 Cancel a Time Delay – Display Keypad
Follow these steps to cancel a Time Delay on a Display Keypad:
1.
While a safe lock is currently in a Time Delay, press the <return key> (←) on the Keypad.
2.
Input a valid User ID and Combination.
3.
From the sub-menu, select “Cancel TD”.
a)
For multi-lock systems, select the corresponding lock number on the keypad
4.
“Lock Dly Cancelled” will appear on screen and the Keypad will beep three times and flash a green LED.
3.14.3.2 Cancel a Time Delay – Non-Display Keypad
Note:
This function is not available on the 701 series of Keypad,
Follow these steps to cancel a Time Delay on a non-Display Keypad:
1.
While a safe lock is currently in a Time Delay, using the Keypad, input #74 + Authorized User ID and
Combi <return key> (←).
2.
The Keypad will beep three times and flash a green LED once complete.
3.14.4 Allow Time Delay Override
For a user to execute a Time Delay Override, the lock must be configured to Allow Time Delay Override. The
Time Delay Period and Confirmation Window period must be set.
There are two ways to perform a Time Delay Override:
1.
The user must possess Time Delay Override w/ Combo privilege.
2.
The user must possess Time Delay Override w/ fob privilege.
Section 3.4.3 “Assigning User IDs and Privileges”
give users Time Delay Override privileges.
3.14.4.1 Allow Time Delay Override – Display Keypad
Follow these steps to Allow Time Delay Override to a safe lock on a Display Keypad:
1.
Enter an Authorized User ID and Combination.
2.
Navigate through the Main Menu and select “System”.
3.
Select “Locks” from the sub-menu.
4.
Select “TimeDelay” from the Locks menu.
5.
Select “ChangeOveride”.
