Doran GuardianXL, Installation And Instruction Manual

Page: 87 / 87

86
Appendix C Error Codes
Code Description
EPRROM CSUM ERROR A hardware error has occurred. Contact
your qualified Doran Dealer for service.
CALIBRATION BAD The scale calibration data fails internal
integrity checks. The scale must be
recalibrated by a qualified Doran
Distributor.
DATA LINK ERROR An internal processing error occurred. This
will not affect scale operation. Contact
your qualified Doran Dealer for service if
this error occurs frequently.
SET UP DATA ERR. Internal configuration data is corrupted.
Contact your qualified Doran Dealer for
service if this error occurs frequently.
DISPLAY ROM ERR. A hardware error has occurred. Contact
your qualified Doran Dealer for service.
CLEAR PLATTER! Scale is attempting to perform a start up
zero and is not within the startup zero band.
TARE LOAD ERROR The scale attempted to load a TARE while
in motion, or the tare value is negative.
ZERO LOAD ERROR The scale attempted to ZERO while in
motion, or while out of the zero band.
ACCUMULATOR ERROR Scale attempted to accumulate while in
motion, or the accumulator has reached
maximum value of 999999 LB.
ACC TARE ERROR The scale attempted to accumulate the
current tare value and an error occurred.
DISPLAY OVERFLOW The measured weight requires more
characters than are available on the display.
DECIMAL PT ERROR An invalid decimal point and count by
setting was selected.
MAIN BOARD ERROR A hardware error has occurred. Contact
your qualified Doran Dealer for service if
this error occurs frequently.